LAMS+™
Water Conditioning Agent, Acidifier-Buffer, Activator
AM-AG LAMS+™ contains a combination of ammonium sulfate and an electrolyte-stablesurfactant system in a convenient liquid form. The low foaming system at the recommended use rates delivers the AMS and surfactant required by glyphosate, glufosinate and many other pest control products. By reducing hard water interactions, increasing uptake and spreading, all at the same time, LAMS+™ significantly increases the performance of most pest control agents.
Principal Functioning
| Ammonium sulfate, surfactants, humectants, and hydrotropes | 44% |
| Constituents ineffective as a spray adjuvant | 56% |
| ------ | |
| 100% |
NOTE: the use rate of 2.5% provides the equivalent of 1 quart of surfactant blend per 100 gallons of tank mix.
All ingredients are exempt from tolerance under 40 CFR 180.
SPECIALTY ADJUVANT SYSTEM DESIGNED FOR AGRICULTURE USE & NON-CROPLAND AREAS
Key Performance Components
- Ammonium sulfate for water conditioning.
- An electrolyte-stable surfactant system.
- Low foaming agent.
Use Rates
Ounces of BREAKER™ to add Chemical Group per 100 lts. of spray mixture
| Application | Use Rate |
| – Insecticides | 1.5 – 6 Lts. per 400 Lts. |
| – Acaricides | 1.5 – 6 Lts. per 400 Lts. |
| – Fungicides and Herbicides | 1.5 – 6 Lts. per 400 Lts. |
| – Glyphosate herbicides for difficult weeds | 2.5 to 5 Lts. per 100 Lts. (2.5 a 5% v/v) |
General Information
AM-AG LAMS+™ contains a combination of ammonium sulfate and an electrolyte-stable surfactant system in a convenient liquid form. The low foaming system at the recommended use rates delivers the AMS and surfactant required by glyphosate, glufosinate and many other pest control products. By reducing hard water interactions, increasing uptake and spreading, all at the same time, LAMS+™ signi cantly increases the performance of most pest control agents.
Mixing Instructions
Prior to making any pesticide application, be sure to use clean mixing and application equipment. Carefully follow the observations on the productlabel. A jar test should be conducted for compatibility before mixing the individual components into the spray tank. Fill spray tank three – quarter fullwith water and begin agitation. Add DRONE-90™ and continue the agitation process. Add pesticides and/or fertilizers as directed by theproduct label or use the following mixing order if no other instructions are available:
1. Micronutrients and fertilizers.
2. Dry flowables & water dispersible granules. ( Be sure the granules have dissolved well prior to adding the remainding ingredients ).
3. Water soluble pesticides.
4. Flowables & emulsi able concentrates.
5. Continue agitation and complete filling of the spray tank.
